If you buy stainless steel by the ton, you already know 304 — the austenitic workhorse with 8–10.5% nickel. But ask most traders about 441 and you will get a shrug. That gap is exactly where the opportunity sits.

Type 441 (UNS S44100) is a titanium-and-niobium dual-stabilized ferritic stainless steel with roughly 18% chromium and almost no nickel. It will not replace 304 everywhere. But in heat-cycle and cost-sensitive applications — automotive exhaust, mufflers, catalytic converter shells, heat exchangers, furnace parts — it often delivers a better cost-to-performance ratio than 304.

Bottom line upfront: Choose 304 when you need deep drawing, non-magnetic finish, hygienic surfaces or maximum general corrosion resistance. Choose 441 when you need heat-cycle stability, lower and more stable cost, and resistance to chloride stress-corrosion cracking. Many buyers should stock both.

1. What Is 441 Stainless Steel?

Type 441 is an 18% chromium ferritic stainless steel stabilized with titanium (Ti) and niobium (Nb). Per ASTM A240/A240M, its typical chemistry is:

Элемент 441 (UNS S44100) 304 (UNS S30400)
Хром (Cr) 17.5–19.5% 18.0–20.0%
Никель (Ni) ≤1.0% (not intentionally added) 8.0–10.5%
Углерод (C) ≤0.030% ≤0.08%
Stabilizers Ti 0.1–0.5%; Nb 0.3+9×C min, 0.90 max None (unless 321/347)
Structure Ferritic Аустенитный
Магнитная Yes, in all conditions No in annealed condition

The Ti + Nb dual stabilization is the key. Both elements preferentially bind carbon and nitrogen, reducing chromium-carbide precipitation at grain boundaries during welding and high-temperature service. The result: better weld-area stability and intergranular corrosion resistance than ordinary ferritic grades such as 430.

2. 441 vs 304: The Numbers That Matter

Собственность 441 304 Buyer impact
Thermal expansion (0–100°C) ≈10.2 µm/m·°C ≈17.2 µm/m·°C 441 distorts far less under heat cycles
Max oxidation service temp ≈950°C ≈870°C 441 wins in exhaust and furnace parts
Thermal conductivity (20°C) ≈25 W/m·K ≈16 W/m·K 441 transfers heat better
PREN (pitting resistance) ≈18 ≈19–21 Similar in mild media; neither suits seawater
Стойкость к хлоридному КРН Excellent (ferritic) Vulnerable 441 is safer in hot chloride vapor
Yield strength (annealed) ≈250–290 MPa ≈205 MPa 441 allows thinner gauges
Deep drawing Ограниченный Отлично 304 for complex forms
Price driver Chrome only — stable Nickel — volatile 441 budgets are predictable

Typical values from ASTM A240 datasheets and published mill data; exact figures vary by temperature range, product form and supplier. Verify against the current standard and your technical agreement.

3. Where 441 Beats 304 — And Where It Does Not

441 is the better choice for:

  • Automotive exhaust manifolds, mufflers, catalytic converter shells and flex pipes
  • Heat exchangers, furnace components and solid oxide fuel cell parts
  • Applications with repeated heating and cooling, where low thermal expansion reduces distortion
  • Hot chloride-vapor environments where austenitic 304 risks stress-corrosion cracking
  • High-volume programs needing stable, nickel-free pricing

304 is the better choice for:

  • Food processing, kitchenware and hygienic equipment requiring easy cleaning
  • Deep-drawn or complex-formed components
  • Non-magnetic requirements and high-polish decorative surfaces
  • Low-temperature service — 441 is ferritic and has a ductile-to-brittle transition
  • Aggressive corrosive media such as high-chloride or strong-acid environments
Important: 441 is not 310S. It resists oxidation up to roughly 950°C, but high-temperature oxidation resistance is not the same as load-bearing creep strength. For structural parts at sustained high temperature, run a dedicated engineering check.

4. Can 441 Replace 304?

Only in specific service conditions — never as a blanket substitution. The right question is not “which grade is better” but “what does your part actually see in service.” Match the grade to temperature cycling, forming depth, magnetic needs, corrosion media and total lifecycle cost — not just price per ton.

A low price on 441 is a false saving if your deep-drawn part cracks. Likewise, paying for 304 is wasteful if your exhaust component only needs heat stability. This is why we recommend buyers source both grades and let the application decide.

5. Quick Decision Matrix: 304 or 441?

Your priority Pick Why
Deep drawing, complex forming 304 Superior ductility, no cracking in deep draws
Non-magnetic or mirror finish 304 Austenitic, takes high polish well
Food, kitchen, hygienic use 304 Easy cleaning, proven hygiene record
Exhaust, muffler, converter shell 441 Low expansion, oxidation to ~950°C, lower cost
Hot chloride vapor, SCC risk 441 Ferritic structure resists stress-corrosion cracking
Budget stability, high volume 441 No nickel price exposure
Seawater or strong acids Neither Specify 316L or duplex 2205 instead

Three sourcing mistakes to avoid

  • Buying 441 as “nickel-free,” then accepting Ti-only 439. Ask for the Nb value on the MTC — dual stabilization is what separates 441 from 439.
  • Specifying 441 for a deep-drawn part to save money. Material savings vanish if the forming line starts cracking.
  • Assuming 441 works at any high temperature. Oxidation resistance to ~950°C is not creep strength at that temperature.

6. Buyer’s Sourcing Checklist

  1. Confirm grade: 304 (S30400) or 441 (S44100)
  2. Confirm standard: ASTM A240 / ASME SA240; also JIS G4305 or EN 10088-4 where required
  3. Specify thickness, width, temper and surface (2B, BA, HL, No.4, 8K)
  4. Request EN 10204 3.1 mill test certificate with each shipment
  5. For 441, confirm Ti + Nb dual stabilization, not Ti-only (439)
  6. Agree on packaging: waterproof paper + PVC film + steel strip + wooden pallet
  7. Confirm MOQ, lead time and port of loading
  8. Arrange third-party inspection (SGS / BV) for first orders

Source 304 and 441 From Orinox Steel

We supply both grades in coil, sheet, strip, tube and custom fabrication — with stock delivery in as fast as 7 days, EN 10204 3.1 certificates and export packaging to 30+ countries.

Tell us your grade, dimensions, surface, quantity and destination port — we will send a quotation within 24 hours.

Request a Quote Browse Stainless Steel Sheet →

Часто задаваемые вопросы

Q1: Is 441 stainless steel magnetic?

Yes. 441 has a ferritic structure and is magnetic in all conditions. 304 is generally non-magnetic when annealed. Magnetism does not indicate better or worse corrosion resistance.

Q2: Is 441 cheaper than 304?

Usually yes, and more stable. 441 contains little or no nickel, so its price is far less exposed to nickel-market volatility. 304 carries 8–10.5% nickel.

Q3: Can 441 be used in marine or coastal environments?

Not for prolonged high-chloride exposure. For marine applications, specify 316L or a duplex grade such as 2205. 441 excels in high-temperature and hot-vapor service, not seawater immersion.

Q4: What is the maximum service temperature of 441?

Its oxidation resistance extends to roughly 950°C, higher than 304’s approximately 870°C. But sustained load-bearing at high temperature requires checking creep strength and thermal fatigue separately.

Q5: Do you provide mill certificates and free samples?

Yes. Every shipment includes an EN 10204 3.1 MTC, and third-party inspection can be arranged. Free samples are available for quality evaluation — contact our sales team for details.

Conclusion: Stock the Right Grade for the Right Job

304 and 441 are not competitors in a ranking table. They are two different engineering answers: 304 for formability, hygiene and general corrosion; 441 for heat stability, chloride SCC resistance and cost predictability. Buyers who understand that boundary source smarter — and protect margins when nickel prices move.

Technical note: This guide discusses UNS S44100 and UNS S30400. Always verify the current ASTM A240/A240M or agreed product standard, chemical limits, delivery condition and mechanical requirements in your purchase agreement. Material substitution should be validated for the actual service conditions.